Viatron AA800EZe Manual de usuario descargar pdf (Pagina 15)

15

AA800EZe rev.04

AA800EZe

3.7.6. Disable the Siren

This function allows disabling the siren in

specific zones. By default, the siren is enabled

on all zones.

Select:1.

• Main Menu

• Install Programming*

• Program Auxiliaries

• Siren Enabled Zone

* Accessible with the Installer or Master password

only (see section 3.2).

Siren Enabled Zone

1 2 3 4

No Yes Yes Yes

5 6 7 8

Yes Yes Yes Yes

Back

Modify

To change the siren status on a zone, 2.

simply press the zone number on the keypad.

Select “Yes” to use the siren on the zone or

“No” to disable it.

3.7.8. Initial Activation of the Zones

This section explains how to activate the

zones when running the system for the

first time. If you want the Agri-Alert to

stop monitoring alarms in a zone after-

wards, use the “Bypass Zone” function

instead of deactivating the zone (see

sec. 5.5.1).

After having been initialized, all zones are dis-

abled. To start using them, you must activate

each zone as shown below (except for burglar

zones: this type of zone is automatically ac-

tivated). The pilot light of a disabled zone is

off on faceplate of the controller.

Select:1.

• Main Menu

• Activate / Bypass

• Activate Zones

The zones that have been initialized are dis-

played on screen. Refer to section 3.7.1 to

create new zones.

Select Zone to Activate

1 2 3 4

No Yes Yes Yes

5 6 7 8

Yes Yes Yes Yes

Back

Modify

Press the zone number on the keypad 2.

to change the zone status. Select “Yes” to

activate it.

3.7.7. Zones’ Vocal Identification

When giving status reports and alarm mes-

sages, the system identifies the zones with

a voice recording provided by the user. This

section shows how to record these mes-

sages.

Select:1.

• Main Menu

• System Auxiliaries

• User Preferences

• Voice ID

• Zone Messages

Use the arrow keys to select the desired 2.

zone.

Zone 1 Message

Record

Play

Erase

Stop

Recording a New ID Message — To record

a new message, press star (*) and record

the ID message (8 seconds maximum). The

Agri-Alert then plays the new message over

the speaker.

Original ID Message — Press the pound key

“#” to retrieve the original ID message.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comentarios a estos manuales

Sin comentarios