Viatron AA800EZe Manual de usuario descargar pdf (Pagina 21)

21

AA800EZe rev.04

AA800EZe

Pager Settings

Select:1.

• Main Menu

• View / Modify

• Phone Numbers

Use the numeric keypad to select a phone 2.

number that uses a pager.

Phone Number 2

Type Pager

Tel.#

Pager Code 0

Delay Pager 10 sec

Back

Phone 3

Set the following parameters:3.

Pager Code — Assign an identification num-

ber to the site where this Agri-Alert device is

located. The ID number of the site can contain

up to 32 digits.

Delay Pager — When the pager system re-

sponds, the Agri-Alert waits for the end of

this delay before sending the event code.

This delay represents the duration of the

voice message of the pager. Set it to the

desired value.

Press the right-arrow key to step to next 4.

phone number.

4.6. On-Site Listening

This feature allows the user to listen to on-

site sounds during a status or alarm report.

The integrated microphone on the control

panel is used for this purpose. The user can

enable or disable on-site listening and adjust

the listening time.

Select:1.

• Main Menu

• View / Modify

• On-Site Listening

On-Site Listening

State No

Time length 0:30(m:s)

Back

Set the following parameters:2.

State: — Select “Yes” to enable the On-site

listening function or select “No” to disable

it. By default, the on-site listening function

is disabled.

Time Length — Set the listening time to the

desired value. By default this parameter is

set to 30 seconds.

4.7. Phone Call-in

It is possible to set the number of rings

before the Agri-Alert answers an incoming

call. The number of rings ranges between 1

and 20 rings.

In addition, the Agri-Alert system can share

the phone line with another phone device

(such as an answering machine or fax). When

the line is shared, the Agri-Alert system

answers incoming calls only if a special ring

sequence is respected. Otherwise, the other

phone device takes the call. Here is how the

special ring sequence works:

• Dial the Agri-Alert phone number and

hang-up after one ring;

• Redial the number after 15 seconds.

The Agri-Alert will answer the call on

firs ring.

The number of rings before the fax or

answering machine answers the call

must be set to more than 1 ring for this

sequence to work.

Select:1.

• Main Menu

• View / Modify

• Phone Call-in

Phone Call-in

Shared Phone Line No

Rings to Answer 8

Back

Set the following parameters:2.

Shared Phone Line — Select ”Yes” if the Agri-

Alert shares the phone line with another phone

device (fax, answering machine or else); select

“No” if no other device is used on the phone

line. By default this function is disabled.

Rings to Answer — If the Agri-Alert does

not share the phone line, set the number of

rings at which it answers a call. By default,

the number of rings is set to 8.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentarios a estos manuales

Sin comentarios