7
AA800EZe rev.04
AA800EZe
USER INTERFACE2.
2.1. Front Panel
LCD Screen
Arrow keys Microphone
Speaker
Short-cut
keys
Keypad
Status LEDs Zone Status LEDs
Graphic LCD Screen: A graphic LCD screen is
used to provide and collect information. The
contrast of this screen can be adjusted with
the potentiometer located behind the display.
Turn the potentiometer with a screwdriver to
adjust the contrast of the screen.
Potentiometer of the
LCD screen
Arrow Keys: These keys are used to step
through menu items.
Speaker: The speaker delivers the system
identification and alarm messages.
Integrated Microphone: The microphone is
used to record ID messages and gives an
on-site listening input.
Keypad: The keypad is used to enter data
and to enable/disable the various functions
of the system.
Hot Keys: The hot keys bring you to specific
pre-defined menus. These menus are not ac-
cessible from the main menu.
Zone Status LEDs:
Zone LED Meaning
Red Zone is in alarm
Green Zone is activated
Amber Zone is bypassed
Off Zone is disabled
System LEDs:
System Status
LED
Meaning
Alarm This LED is On when one or
more alarm conditions are de-
tected (the individual zone LED
on the right side of the panel
tells which zone is in alarm).
System in
Standby
This LED is ON when the
Agri-Alert system is in standby
mode (the system does not
monitor alarm conditions). It
turns OFF when normal moni-
toring is resumed.
Burglary
Armed
This LED is ON when the
burglar zone is armed.
Phone This LED is ON when the sys-
tem uses the phone line.
Modifying a Parameter2.2.
Use the numeric keypad and/or the up and
down arrow keys to modify the value of a
parameter and then press Enter to validate
the new value.
A password may be required to change the
value of a parameter. Refer to section 3.2.2
to enter/change your password or to disable
the protected access.
2.3. Navigation
Menus items can be accessed with the ar-
row keys or by pressing the proper number
on the numeric keypad. A highlight bar indi-
cates which item is selected on screen. You
can move this bar up and down using the
arrow keys and then press “Enter” to select
the menu item. Press “Back” to exit from a
menu.
To get further information about the naviga-
tion process, select the help menu:
Select:1.
• Main Menu
• Help Menus
• Programming Notes
The system gives the meaning of all possible
navigation icons:
Programming Notes
Previous Screen/
Cancel Editing
Enter/Select/Apply
N a v i g a t e
Exit Wizard
Next wizard Step
Increase /
Decrease Value
Negative Sign/Switch
time to PM
Insert Pause in Phone
Number
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales